Selling Price -$18,730.00
Selling Price -
$18,730.00
2024 John Deere X700 Signature Series X730
- 25.5-hp (19 kW) iTorque™ Power System
- Power two-wheel steer, power lift system, Twin-Touch™ forward and reverse foot pedals
- 4-year/700-hour bumper-to-bumper warranty
- Available in 48-, 54-, and 60-inch mower deck sizes
Features may include:
Engine is smooth running and reliable V-twin liquid-cooled designThe V-twin, liquid-cooled John Deere iTorque power system with electronic fuel injection (EFI) provides exceptional performance and has the durability to handle commercial-use applications. The John Deere iTorque power system includes a combination of engine features that provide more lugging ability, even cooling, and durability.
iTorque stands for intelligent design (to get a task done efficiently) and torque (good lugging ability). It is used exclusively on gasoline-powered Select Series™ and Signature Series Tractors.
The 25.5-hp (19-kW) liquid-cooled V-twin engine has a large 45.5-cu in. (745-cc) displacement to provide plenty of power and torque for excellent performance in any operating condition. The one-piece hood is hinged to open for convenient engine service.
Key engine features include:
Liquid cooling- Longer engine life
- Quieter operation
- Improved fuel economy
- Smoother running
- Easier starting
- More horsepower and torque per cubic inch of displacement
- Better cooling for longer engine life
- Reduced oil consumption
- Improved fuel economy
- Full-pressure lubrication with replaceable oil filter that provides plenty of clean oil for long engine life
- Horizontal crankshaft with a drive shaft connection to the transmission for positive power transfer
- Efficient heat dissipation
- Strength and durability with less weight
- Liquid cooling for consistent operating temperatures
- OHV for efficient lean burn combustion
- Precise air-to-fuel ratio control with electronic fuel injection
- Closed crankcase ventilation re-circulates and burns crankcase hydrocarbons
- Oil drain valve with hose and oil filter drip tray for easy, no-mess maintenance
- Electronic ignition for quick, sure starts
- Vibration-free operation
- Lower noise
- Electric fuel pump ensures positive fuel delivery for fast starts and smooth running
- Solenoid-shift starter ensures that starter stays engaged until key switch is released for fast cold-weather starts
Engine intake air is drawn in through screened panels at the base of the pedestal and on the right and left sides of the tractor hood:
- Cleanest and coolest area of the tractor
- Pre-cleans the air to keep large chaff and debris from entering the radiator or air cleaner
- Easy to clean and service so engine operates at optimum temperature
An inertia-discharge canister with dry-type paper element surrounded by a foam precleaner cleans intake air for long engine life:
- Ejects large dirt particles before they make contact with the filter
- Provides dual protection against dirt entering the engine
- 2024
- John Deere
- X700 Signature Series
- X730
- Riding
- Model: FD750D EFI
- 19 kW (25.5 hp)
- 745 cc (45.5 cu in.)
- Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
- V-twin, cast-iron liners
- Mechanical
- method: Liquid
- Dry, replaceable with foam precleaner
- Solenoid shift
- delivery: Electronic fuel injection
- Gasoline | tank location: Rear
- Gauge on dash
- Hydraulic power | Tilt wheel: six position
- Mower: Hydraulic clutch, shaft | Mower attachability: Shaft or AutoConnect
- Internal wet disc
- 26x12-12 turf
- 18x8.5-8 turf
- Mower: 48A, four and center front roller
- 12 V / 340 CCA
- Flywheel alternator, regulated, 20 amp
- Forward: 0-13.7 km/h (0-8.5 mph) | Reverse: 0-9.7 km/h (0-6 mph)
- outlets: Four
- Welded heavy-duty
- Receiver: front
- Headlights: Two standard, halogen, 37 W | Taillights or reflector: Taillights
- Backup protection: Reverse Implement Option (RIO)
- Fuel fill opening On left fender: 7.6 cm (3 in.) | Steering wheel: 35.6 cm (14 in.) | Fore-aft adjustment: 14-position, 17.8 cm (7 in.) | Mower deck material - 48A: 10 gauge 3.4 mm (0.135 in.) / 54 HC and 60 HC: 9 gauge 3.8 mm (0.150 in.) | Mower wheels rotate: 90 degrees for easy mower removal (48A), (54 HC, 60 HC)
- Accel Deep™ mower deck: 122 cm (48 in.) / High capacity mower deck: 137, 152 cm (54, 60 in.)
- 63.5 cm (25 in.) | Uncut circle - 54 HC: 81.3 cm (32 in.) / 60 HC]: 71.1 cm (28 in.)
- back: 53.3 cm (21 in.)
- Mower cut: 2.5-13.3 cm (1-5.25 in.) | Cut increments: 0.64 cm (0.25 in.) | 1384 mm (54.5 in.)
- 1905 mm (75 in.)
- 1384 mm (54.5 in.)
- with mower - 48A: 1588 mm (62.5 in. ) / 54 HC: 1638 mm (64.5 in. ) / 60 HC: 1880 mm (74 in.) | with mower (deflector raised for storage) - 48A: 1362 mm (53.6 in. ) / 54 HC: 1461 mm (57.5 in.) / 60 HC: 1575 mm (62 in.) | without mower: 1195 mm (47 in.)
- tank: 19.7 L (5.2 U.S. gal.)
- Maximum: 454 kg (1,000 lb)
- bracket - front - holds up to four Quik-Tatch weights: 19 kg (42 lb) | 389 kg (857 lb )
- Transaxle type: K90 hydrostatic integrated with transaxle | Transaxle control: Twin Touch™ pedals | Primer/paint: E-coat/powder | Floor mats: Sure-grip rubber | Storage: Covered toolbox | Fender handles/grips: Handles | Mower deck: Side discharge | Mower attachability: Roll under tractor (48A) / Drive-over deck (54, 60 HC) | Front draft arms: Overcenter | Rear draft arms: V-align
- system type: Two-function hydraulic
- change: No tools | filter: Replaceable suction side 10 micron
- Front axle: JDM BA8 nodular iron casting | Spindle bushings: Metal, replaceable | Hood: Noryl GTX902, painted | Mower deck: Forged steel deck shell
- Fender: Stamped steel
- Two-piece adjustable seat with brand embroidery | suspension: Six-position parallel arm
- Fore-aft: While seated, slide rail | Mower wheel: Spring-loaded pin | Mower level: Exact Adjust ports and onboard deck-leveling gauge
- 4 year/700 hour bumper-to-bumper
- $20,700.00
- $18,730.00
- Belleville
- New
- B019933
- 2024
- John Deere
- X700 Signature Series X730
- Model: FD750D EFI
- Gasoline | tank location: Rear
- Available
- with mower - 48A: 1588 mm (62.5 in. ) / 54 HC: 1638 mm (64.5 in. ) / 60 HC: 1880 mm (74 in.) | with mower (deflector raised for storage) - 48A: 1362 mm (53.6 in. ) / 54 HC: 1461 mm (57.5 in.) / 60 HC: 1575 mm (62 in.) | without mower: 1195 mm (47 in.)
- Mower cut: 2.5-13.3 cm (1-5.25 in.) | Cut increments: 0.64 cm (0.25 in.) | 1384 mm (54.5 in.)