2025 John Deere Minimum-Till Ripper MT9
- Year 2025
- Make John Deere
- Model Minimum-Till Ripper
2025 John Deere Minimum-Till Ripper MT9
2025 John Deere Minimum-Till Ripper MT9
- 9 standards
- Four stabilizer wheels
- Integral or drawn options
- Extended wear standards deliver twice the life expectancy
Features may include:
Manage compaction faster- MT Series Minimum Till Rippers are built to run at 4 – 7 miles per hour behind today’s high horsepower tractors.
- Rip 25 more acres per day with the MT11 compared to the previous 9 standard model. MT Series Rippers break-up deep compaction at depths up to 16 in. while minimizing topsoil disturbance.
- Extended wear standards deliver double the life expectancy compared to previous 2100 ripper models. The MT series delivers a highly productive and easy to set minimal maintenance solution to breaking up soil compaction. Spend less time changing components and more time working your ground.
- TruSet Active is included in-base for MT Series Drawn models. (TruSet Active is not available on Integral hitch models).
- TruSet Active provides better documentation of agronomic data and the ability to run prescription files. With TruSet Active, operators can adjust depth from inside the cab. Single point (manual) depth control is also included as standard equipment on drawn machines.
- TruSet Active maintains the desired depth of the MT Series (with Drawn hitches). When field conditions are challenging, TruSet Active uses ultrasonic technology to keep the ripper at desired depth regardless of mud on the tires, or when tires sink into soft soils.
Engine
Engine Power
29.8-44.7 kW 40-60 hp
Wheels & Tires
Tires, Rear Specification
Tires 10 PR
Operational
Operating Speed
Miles per hour: 6.4-11.2 km/h 4-7 mph
Operating Conditions
Option 1: Trip force Shear-bolt: 3,265 kg 7,200 lb Standard type Straight with wear shin: 19 or 31.75 mm 0.75 or 1.25 in. Shear-bolt | Option 2: Trip force 1,451.5 kg 3,200 lb Trip height 30.5 cm 12 in. Standard type 19 mm 0.75 in. Cushion trip | Coulters Pounds of force Normal working load: 272.2 kg 600 lb Deflection of: 10.2 cm 4 in. Maximum trip load: 362.9 kg 800 lb Deflection of: 20.3 cm 8 in. | Down force: 113.4 kg 250 lb
Hydraulics
Maximum Pressure
1 SCV (fold) at 17,237 kPa 2,500 psi
Chassis
Hitch/Type
Option 1: 3-point hitch for integral | Option 2: TruSet™ Active (with drawn hitch) | Three-point hitch requirements: Category 4N (with Quik-Coupler) | Pull-type description: Category 4 or 5 Hitch | Integral
Dimensions
Width, Working Position
6.8 m 22.5 ft
Transport Width
4.8 m 15.5 ft
Depth, Maximum
40.6 cm 16 in.
Ground Clearance
Maximum underframe clearance: 89 cm 35 in.
Dimensions
Wheels: 52.1x20.3 cm 20.5x8 in. | Angle adjustments: 1 to 15 degree (angle) | Closing wheel attachment: Size 10.2x40.6 cm 4x16 in. | Closing wheel attachment Spacing: 19.05 to 35.6 cm 7.5 to 14 in. | Blades Straight or rippled: 559x4.5 mm 22x0.1777 in. | Options Ground-engaging components Standard: 19 mm (0.75 in.) min-till point: 178 mm (7 in.) low-disturbance: 254 mm (10 in.) ultra-low-disturbance: 63 mm (2.5 in.) Standard: 31.75 mm (1.25 in.) Regular: 57 mm (2.25 in.) Capped: 57 mm (2.25 in.) Double-capped: 57 mm (2.25 in.) LaserRip points: 70 mm (2.75 in.), 127 mm (5 in.), and 178 mm (7 in.) | Spacing between standards: 76.2 cm 30 in. | Frame Size: 152x152x9.5 mm 6x6x0.35 in.
Features
Features
Stabilizer/gauge wheels: Four Stabilizer wheels | Tool configuration Type: In-line ripper | Coulters: Spring cushion coulters